Tweet
Looking GOOD!!. And I agree with Ray, those catsup bottles came out really nice. :up: :up:
Bob
Bob
-
-
Thanks Guys,
Here are a few more pic's. still adding stuff.
Here is a better shot of the paint cans painted and labeled. You can see the lid detail a little more...
Comment
-
I went back to the lathe and made me a couple kerosene lanterns. I then made molds and poured a few..
Here are the finished product. I used pin headed for the wick adjustment.
Comment
-
Outstanding details.[:-magnify]
FrankComment
-
Thanks Frank,
I am waiting on a cash register . I did feel I could make one. I ordered one that may work.
Comment
-
Very nice!
Comment
-
Wow Its almost been a month since I post anything on this thread.
I have done a little more work this week. I needed to build a store room and a wooden walk way. Sorry I don't have more pic's of the storeroom. But it is built just like the main building and I used the same flooring from the store on the floor and walls.
Ty
Comment
-
When I did the wooden walkway I went back to the resin casting I used in the in the small depot. I cut the casting to fit the edge of the building...
I then used the reinforcing casting underneath to tie all the the shape together. I used balsa wood along the back because it not visible. The reinforcing casting has the wood grain on it to match the top..
Comment
-
Next I primed it with the etching primer and painted it like i did the Floating dock on the other thread.
Comment
-
I been a little tied up but I did vacuum form a roof for the store. The roof was applied to a balsa base then painted.
Comment
-
Comment
-
Well This is the time of year my wife is gone for 10 days on a missions trip to Nicaragua. She does Medical mission through our church. I usually take the time off the take care of things around here. It gives me time to get alot of stuff done ..I hope to make some progress on my indoor layout out this next 10 days...
Ty
Comment
-
My plan is to get all of the fascia installed. The round table table front enclosed. The front curtain installed. I have an Engine house and car shop that I want to start...So we will have to see what i can accomplish..
Ty
Comment
-
I started working around the turntable. I had to cut a new piece of 3/4" ply to widen the area around it. So that was cut and glued in place with gorilla glue. I then added the rounded fascia to the curved section.
Comment
-
I then went and added the foam to the complete the circle...
Comment
Comment