Author |
Topic  |
Michael Hohn
Fireman
   

|
Posted - 03/31/2019 : 3:59:01 PM
|
Dave,
You don’t say whether you’re looking for a different product, but if so, I use the peel n stick slate from MinuteMan Scale Models.
Alternatively, would it be prototypical for your period to have fire walls projecting above the roof? Two would do the job.
Or, how about a metal roof for variety?
Mike
|
|
Country: USA
| Posts: 7218 |
 |
|
deemery
Fireman
   
Premium Member

|
Posted - 03/31/2019 : 4:18:57 PM
|
Mike, just mulling things over right now. Firewalls aren't all that common in my observation on 19th century mills.
i like the look of the NESL slate 'paper'. Here are some long slate roofs from the previous layout.
 That's an old RDA Plaster Hermanson's kit on the right, and a doubled-up RDA Easton? mill on the left.
In other news, I started cutting subwalls from .060 styrene (that I have in bulk), but then I remembered that stuff is hard to snap. So I cut the end and side that will get windows (the other two walls won't be seen) from .040 styrene. I found a source for sheet .040 so I can get some more. (Buying 4x8 sheets is a lot cheaper than buying Evergreen sheets.)
dave
|
Modeling 1890s (because the voices in my head told me to) |
|
Country: USA
| Posts: 8838 |
 |
|
slimrails
Moderator
   
Premium Member

|
Posted - 03/31/2019 : 4:25:38 PM
|
That's shaping up into one terrific mill scene, Dave. 
|
|
Country: USA
| Posts: 8533 |
 |
|
deemery
Fireman
   
Premium Member

|
Posted - 03/31/2019 : 5:14:42 PM
|
That picture is from my previous layout. I'm sure I'll find some way to reuse those structures. They're not "flats", but the back walls are blank, so that limits where I can use them.
dave
|
Modeling 1890s (because the voices in my head told me to) |
|
Country: USA
| Posts: 8838 |
 |
|
Michael Hohn
Fireman
   

|
Posted - 03/31/2019 : 6:25:32 PM
|
They both have that New Englandy look, especially the one on the right.
Mike
|
_________________________________________________ Not everything that is faced can be changed, but nothing can be changed until it is faced. James Baldwin |
|
Country: USA
| Posts: 7218 |
 |
|
deemery
Fireman
   
Premium Member

|
Posted - 04/05/2019 : 7:42:48 PM
|
Some work-in-progress for the mill construction. I'm using the (Nehrich) scribe and snap approach.
Lines are scribed and cells are marked (so I can identify them during reassembly.)

Reassembly
 After this dries, I sand with one of those large sanding sponges, to get the scribe ridges and any glue pops sanded flat. Then I add bracing.
 Once that's dry, I flip it over, sand the outside, and then adjust the holes so the windows fit. There is a window casting there on the bottom row.
 Note the windows will actually be installed from the inside (upside down, so the sashes are aligned correctly.) This simulates a masonry window with interior framing.
I did the large side earlier this week, so both side and end pieces are done Next step is laminating the brick sheeting.
dave
|
Modeling 1890s (because the voices in my head told me to) |
|
Country: USA
| Posts: 8838 |
 |
|
jbvb
Fireman
   
Premium Member

|
Posted - 04/05/2019 : 8:32:36 PM
|
That's going to be an imposing building.
|
|
Country: USA
| Posts: 6804 |
 |
|
deemery
Fireman
   
Premium Member

|
Posted - 04/05/2019 : 8:53:29 PM
|
The other side and end will be blank. But I still need to do a tower. I'll do the main building first, and then do the tower as a separate construction.
dave
|
Modeling 1890s (because the voices in my head told me to) |
|
Country: USA
| Posts: 8838 |
 |
|
Orionvp17
Fireman
   
Premium Member
|
Posted - 04/05/2019 : 9:50:08 PM
|
I agree with James.
Like!
Pete in Michigan
|
|
Country: USA
| Posts: 7530 |
 |
|
railman28
Fireman
   

|
Posted - 04/05/2019 : 11:53:35 PM
|
So very nice Dave
|
It's only make-believe
|
|
Country: USA
| Posts: 5712 |
 |
|
deemery
Fireman
   
Premium Member

|
Posted - 04/07/2019 : 6:47:48 PM
|
Brick sheeting laminated to subwalls (transfer tape) and the window openings cut through the brick sheet. Next step is to paint the window castings and to add brick trim, before painting the brick the base (red) color.

dave
|
Modeling 1890s (because the voices in my head told me to) |
|
Country: USA
| Posts: 8838 |
 |
|
Orionvp17
Fireman
   
Premium Member
|
Posted - 04/07/2019 : 6:57:12 PM
|
Looking good, Dave!
What's the source of the brick sheeting? If you mentioned it somewhere, I may have been absent that day, or more probably was asleep in class.... 
In any event, I need something like this, and this gives me ideas.... 
Pete in Michigan
|
|
Country: USA
| Posts: 7530 |
 |
|
deemery
Fireman
   
Premium Member

|
Posted - 04/08/2019 : 10:00:36 AM
|
quote: Originally posted by Orionvp17
Looking good, Dave!
What's the source of the brick sheeting? If you mentioned it somewhere, I may have been absent that day, or more probably was asleep in class.... 
In any event, I need something like this, and this gives me ideas.... 
Pete in Michigan
The N Scale Architect: https://thenarch.com/catalog/building-sheets They have several different styles/patterns of brick in multiple scales, as well as other useful sheets.
dave
|
Modeling 1890s (because the voices in my head told me to) |
Edited by - deemery on 04/08/2019 10:30:28 AM |
|
Country: USA
| Posts: 8838 |
 |
|
Orionvp17
Fireman
   
Premium Member
|
Posted - 04/08/2019 : 10:12:34 AM
|
So noted, and thanks. 
Pete in Michigan
|
|
Country: USA
| Posts: 7530 |
 |
|
Carl B
Fireman
   
Premium Member
|
Posted - 04/08/2019 : 11:15:47 AM
|
Dave, looks good.
Any chance you could show those N-scale Architect brick sheets (unpainted) in a closeup?
|
|
Country: USA
| Posts: 4150 |
 |
|
Topic  |
|