|T O P I C R E V I E W
||Posted - 03/21/2014 : 8:07:43 PM
Just thought I would do a new thread on the Machine Shop I'm building.
In between the glue & paint drying on the mill.
First up is the Sierra West Bolt Cutter.
And thanks to Brett for making these casting so clean. Also some really good instructions on doing these.
Not sure which one I'll do next.
Note. Don't know why the handles look so red there not. Comments welcome.
|15 L A T E S T R E P L I E S (Newest First)
||Posted - 01/17/2019 : 1:03:43 PM
OK Jerry, I see you are on this thread...not to hijack anything, but I can't seem to find your latest updates!
||Posted - 01/17/2019 : 1:02:24 PM
Rich, Carl, Frank & Greg
I'm still here!
There was a slight boo-boo made when doing the door hinges all 18 of them.
So I had to take them all off without destroying the wood and now have one set re done. Just need to hang them.
Pictures next week.
But thanks for looking in and keeping me in mind!!
||Posted - 01/16/2019 : 8:56:29 PM
Oh Jerry! Oh Jerry! Where for art thou my Jerry?
I think we are starting to gang up on you.
||Posted - 01/16/2019 : 6:34:57 PM
||Posted - 01/16/2019 : 5:12:53 PM
I"ll 2nd that Rich !
||Posted - 01/16/2019 : 4:44:22 PM
Waaa ... Waaa ...Waaa,,, I started the ball rolling ... now I will be beat up for this one !
Where's the latest edition of this build?? LOL
||Posted - 11/27/2018 : 11:55:34 AM
Thanks Rick glad you like it.
Frank thinks were slow but if we work together were really half-fast!!
||Posted - 11/27/2018 : 10:25:14 AM
Well done Jerry!
Reward yourself with an Eagle Rare neat.
Originally posted by Frank Palmer
Jerry you’re almost as slow as Rick!
Frank, nobody's that slow.
||Posted - 11/26/2018 : 11:55:37 PM
Greg I'm not getting unhinged again to much trouble!
Larry thanks for the compliment.
Carl thanks for looking over my shoulder.
Frank you know its the original way Chuck Doan did it.
2 coats Silverwood or more.
Brush on mineral spirits just before it dries coat with Pollyscale two coats wait 15 seconds or so between coats.
Then wait 1 to 2 minutes and take scotch tape and gently pull the paint off.
Roland yes winter is here except yesterday we were on the beach a beautiful day!!
Philip thanks for looking in.
Rich thanks no latches yet. I still have to make more doors!
Jim that stuff is a long way off yet.
Thank all you guys for looking in.
||Posted - 11/26/2018 : 10:58:55 PM
Let's get crackin' Jerry. When are we gonna see some 'shenery'? Lineshaft or more modern?
||Posted - 11/26/2018 : 9:53:26 PM
Nice doors and a good start on windows too. Well, you're not anywhere around, so you must be working on the door latches...
||Posted - 11/26/2018 : 8:18:31 PM
||Posted - 11/26/2018 : 7:59:42 PM
Another reason I like winter so much. Jerry gets back to work. Looks great
||Posted - 11/26/2018 : 6:24:38 PM
Jerry you’re almost as slow as Rick! However when you get the “urge” to model you do some nice work. The beach and the yard work is out this week so get busy on that model.
You gonna' splain yourself on how you did the weathering or are you going to make me ask?
||Posted - 11/26/2018 : 5:29:55 PM
Well done doors Jerry!